IMPAK CORPORATION
PAKVF2.5MG
PAKVF2.5MG
PAKVF2.5MG is a laminated structure with gold colored metallized polyester to polyolefin. The gold color is encapsuled between the polyemeric plastic layers and therefore cannot be removed by abrasion. This lightweight material is FDA approved for food contact.
PHYSICAL PROPERTIES (48 g MET PET/LLDPE–2.0 mil)
| Total Thickness (mils) | 2.5 mil |
|
|
|
|
Tensile Strength (ASTM D882-83 METHOD A)
|
MD: 5800 lb./in²
TD: 6600 lb./in² |
| Tear Strength (D1004-66 NOTCHED) |
MD: 2.5 lb.
TD: 2.0 lb. |
| Elongation (ASTM D882-83 METHOD A) | MD: 80% |
|
|
|
| Bursting Strength (FTMS 101-C Method 2007. 1A) | <50 psi. |
|
|
|
| Puncture Strength(FTMS 101-C Method 2065.1) | <12 lb. |
|
|
|
| Heat Seal Strength (D-1876-72: VERTROD) | < 8 lb./in width ambient |
|
|
|
| Light Transmission (ASTM D 1003-77) | 40% +/- 5% |
|
|
|
| Moisture Vapor Transmission Rate (ASTM F-1249) | 0.3gr./100in² 24hrs. |
IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.
Back to Main Page
©1999-20004 SorbentSystems.Com.
All rights reserved.