IMPAK CORPORATION
MIL PRF 81705 T1
MIL PRF 81705 T1
This laminate has a wide range of uses and applications including vacuum crating and pouches for micro-circuits, semi-conductors, and resistors; applications requiring permanent electrostatic protection; and moisture and oxygen sensitive packaging. MIL PRF 81705 T1 is silver with black MIL-Spec printing and is used extensively in Navy QPL military applications.
MIL PRF 81705 T1: is usually converted into sheeting, tubing, and 2-seal pouches with a Faraday Cage.
PHYSICAL PROPERTIES: 48Ga METPET / 10# LDPE / 30ga FOIL / 3.0mil ESD Sealant
| PROPERTIES | TEST METHOD | UNIT | TYPICAL VALUE |
| Caliper | ASTM D2103 | mils | 4.5 |
| Yield (Nominal) | Calculated | sq. in/lb. | 5,680 |
| MVTR | ASTM F1249 | gms/1002 in./24hrs @ 90% RH 40c |
.0005 |
| OTR | ASTM D3985 | cc/1002 in/24hrs @ 0% RH 23c | .0005 |
| Puncture | MIL STD 3010 | lbs | 19 |
| Tensile Strength | ASTM D882 | Psi | MD: 4100 TD: 4300 |
| Electro Static Shielding | EIA-541 Appendix | Volts | 0.45 |
| EMI Attenuation | MIL PRF 81705D | db | >35 (Before Flexing) 30 (After Flexing) |
| Static Decay | MIL PRF 81705D | sec | Inner: <1.0 Outer: <0.02 |
| Surface Resistivity | MIL PRF 81705D | Ohm | Inner: 7.0x1010 Outer: Undetectable |
| Seal Strength | ASTM F88 | lbs/in | 19 |
IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.
Back to Main Page
©1999-2013 SorbentSystems.Com.
All rights reserved.