SorbentSystems.com

IMPAK CORPORATION

PAKVF4PC

PAKVF4PC is an ultra-high barrier foil laminated structure with high performance adhesives. The proprietary sealant layer is designed to withstand the effect of chemicals (essential oils and aggressive products that cause delamination in lesser structures.). The proprietary sealant layer is also designed with minimal additives and stabilizers to eliminate outgassing providing an inert contact layer for sensitive media.

CONSTRUCTION: 60 ga. BON (Biaxally Oriented Nylon)/.5mil ALUMINUM FOIL/4.4 mil CAST POLYPROPYLENE


PHYSICAL PROPERTIES:

TOTAL THICKNESS: 6.0 mil
WATERVAPOR TRANSMISSION RATE (FED-01) 0.0003 gms./100sq.In./24 hrs.
O2 TRANSMISSION RATE (MOCON)
This is a certified maximum transmission rate .
No other inventoried structure has a .5 mil foil layer.
0.0006 cc/100sq.In./24 hrs.
TENSILE STRENGTH (FTMS 191A-5102) 5323 psi
TEAR (ASTM-689) MD 800 gms.
XMD 1300 gms.
SEAL STRENGTH (ASTM-D-882)475F;26psi;1sec 12 Lbs/In.
PUNCTURE STRENGTH (FED TM2065) <25 LB.
FOIL LAYER 0.0005 in


IMPAK CORPORATION makes no warranty, expressed or implied, as to the suitability of these materials for any specific use. The values shown above were developed from random samples taken from production material. We believe them to be typical for the product. Actual values may vary somewhat from those depicted here. Customers should determine product suitability based upon their own internal criteria.

Back to Main Page
1999-2004 SorbentSystems.Com. All rights reserved.