Large Desiccant Bags


IMPAK has a large variety of industrial and commercial grade desiccants. These large desiccant bags are ideal for use in shipping containers, controlled RH environments, artifact display cases, sensitive commodity storage facilities, and other large controlled environments. 80 unit bags are the largest desiccant bags available. They have more than 5 lb of absorbent media within and can lower the humidity to below 20% in 160 cubic foot area.
To understand the use of this product in a non-industrial environment Contact Us and find out about its various consumer uses.


NOTE: Shipping cost may not be accurate. You will be contacted with actual shipping cost upon order.

IMPAK now has Protective Freight & Cargo Liner

MAKE YOUR OWN BAGS

If you have wide varieties of parts that are of different sizes and you are utilizing the combination of our hot jaw or our advanced mobile hand held sealing units, try using this 200yd material. The material works great in conjunction with the mobile hand held sealers.

Made in the USA and used extensively by the US Military.

With the purchase of this material, you can purchase the Hot Jaw for $99.00

Image Part Number Material Pricing
MS360-36Y200 MIL-B-131 1 Roll: $355.36
2-4: $331.59
5-9: $307.81
10+: $295.66

Add a IPKHS-606T Hot Jaw Sealer for $99.00


Part Number Gram Weight Description Order
Per Pack: LDT800-01


500g 4A Molecular Sieve
6" x 9"
1 bag/pack
5 bags/case
1 case: $211.11 ea
2 - 4 cases: $191.06 ea
5+ cases: $170.06 ea

Case(s)
Per Pack: LDT800-01


Per Case: LDT800-05
5lbs Clay
80 Unit packets 1 bag/pack
5 bags/case
1 pack: $11.51 ea

1 case: $45.42 ea
Case(s)

Desiccant Requirement Chart

Cubic Inches Cubic Feet Gallons Square Inches Square Feet Required Desiccant
237-475 .14-.28 1.1-2.1 15-29 0.1-0.19 1/6 unit
476-714 .29-.42 2.2-3.2 30-45 0.2-0.29 1/3 unit
715-1274 .43-.82 3.3-6.3 46-89 0.3-0.59 1/2 unit
1275-2499 .83-1.66 6.4-12.5 90-179 .06-1.20 1 unit
2500-3849 1.67-2.49 12.6-18.6 180-269 1.20-1.29 2 unit
3850-4286 2.50-3.32 18.7-24.9 270-359 1.30-1.89 4 unit
4287-5713 3.33-4.16 25.0-31.1 360-449 1.90-2.49 4 unit
5714-7142 4.17-4.99 31.2-37.3 450-539 2.50-3.09 8 unit
7143-8570 5.00-5.82 37.4-43.5 540-629 3.10-4.39 8 unit
8571-9999 5.83-6.66 43.6-49.9 630-719 4.40-4.99 8 unit
1000-11422 6.67-7.49 50.0-56.0 720-809 5.00-5.59 8 unit
11423-12856 7.50-8.32 56.1-62.2 810-899 5.60-6.29 16 unit
12857-14285 8.33-9.99 62.3-74.7 900-1079 6.30-7.49 16 unit
14286-17142 10.00-11.68 74.8-87.2 1080-1259 7.50-8.79 16 unit
17143-19999 11.69-13.32 87.3-99.6 1260-1439 8.80-9.99 16 unit
20000-22856 13.33-16.66 99.7-124.9 1440-1799 10.00-12.49 16 unit
22857-28570 16.67-24.99 125.0-186.9 1800-2699 12.50-18.79 16 unit
28571-42856 25.00-33.32 187.0-248.9 2700-3599 18.80-24.99 80 unit
42857-57142 33.33-41.66 249.00-XXXX 3600-4499 25.00-31.29 80 unit
57143-71428 41.67-49.99 XXXXX 4500-5399 31.30-37.49 80 unit
71429-85713 50.00-58.20 XXXXX 5400-6299 37.50-43.79 80 unit
85714-9999 58.30-66.69 XXXXX 6300-7199 43.80-49.99 80 unit
100000-114286 66.70-XXXX XXXXX 7200-XXXX 50.00-XXXX 80 unit

Handling of desiccants is critical to their performance. The moisture adsorption capacity of desiccant packets can be diminished by up to 25% within one hour or less of exposure depending on the RH of the environment. Care should be taken to ensure that desiccant packets are stored and handled properly to ensure maximum effectiveness.